Design and testing of ITER ECH & CD transmission line components

Initial testing on the Japan Atomic Energy Agency Gyrotron Test Stand of ITER-relevant TL components, has shown reasonable efficiencies, but identified that trapped modes between closely located miter bends, as well as mode conversion at miter bends can lead to excessive heating of the connecting waveguides. General Atomics has designed, built, and will test components to address this issue as well as ITER relevant components that have not been tested at the levels of 1 MW, 170 GHz, for extended pulse lengths. Some of the components that will be tested are ultra low loss miter bends, dc breaks, polarizers, power monitors, bellows, waveguide switches, waveguide cooling clamps, etc. Details of the components and test results will be presented.     

EFFECT OF STEPWISE CHANGE OF DRYING RATE ON MICROSTRUCTURE EVOLUTION IN POLYMER FILMS

The effect of the drying rate of the solvent on microstructure evolution in thin films of immiscible polystyrene/polycarbonate blends was investigated by applying a stepwise change in air velocity. The polymer blend was dissolved in tetrahydrofuran and cast on a glass substrate to form a thin liquid film. The drying rate of the solvent was measured by a gravimetric technique, and the phase-separated structure in the film was observed by optical microscopy. The results indicated that cellular structures of droplet arrays were formed in the phases evolved primarily during the early stage of drying, and the droplets then coalesced in the intermediate stage to form bigger droplets. The size of the first evolved phase decreased with increasing time at a high drying rate, whereas larger droplets were obtained with longer high drying rate regimes. These results suggested that the droplets were induced by secondary phase separation which was strongly affected by the drying rate of the solvent.     

Liquid phase growth of graphene on silicon carbide

We developed a novel method to produce graphene on silicon carbide (SiC) at a temperature as low as 1000 °C. The method is based on liquid phase growth (LPG) of graphene mediated by liquid gallium, which acts not only as a flux to store carbon dissolved from a surface of SiC when heated, but also as a catalyst to promote the formation of graphene on SiC when cooled. Our experimental results revealed that gallium-treated SiC substrates are coated with uniform and continuous graphene films. The LPG method is able to supply graphene films consisting of one to several hundreds of layers, depending on heating temperatures. Our approach can not only provide an alternative way to form graphene natively on SiC, but will also bring a technological breakthrough in industrial applications of graphene, e.g. the realization of graphene-on-insulator substrates.     

Cloning and characterization of a β-N-acetylglucosaminidase (BmFDL) from silkworm Bombyx mori

In insects, β-N-acetylglucosaminidase (GlcNAcase) participates in critical physiological processes such as fertilization, metamorphosis, and glycoconjugate degradation. Insects produce glycoproteins carrying paucimannosidic-type N-glycans, the terminal GlcNAc residue of which is cleaved by a GlcNAc-linkage specific GlcNAcase, also known as the fused lobes (FDL) protein. To obtain information on the structure of GlcNAcases and insight into their contribution to physiological processes, we cloned Bombyx mori FDL (BmFDL) from silkworm larvae. The full-length cDNA (1.9 kb) encoded a protein of 633 amino acids with 42% amino acid sequence identity to Drosophila melanogaster FDL (DmFDL). Recombinant BmFDL cleaved only β-1,2-linked GlcNAc residues from the α-1,3 branch of biantennary N-glycan. This substrate specificity was similar to that of DmFDL. Microsomal FDL activity was inhibited by anti-BmFDL antibodies. Taken together, our results suggest that BmFDL is a N-glycan-processing GlcNAcase in B. mori.     

A flow method with photocatalytic oxidation of dissolved organic matter using a solid-phase (TiO2) reactor followed by amperometric detection of consumed oxygen

A photocatalytic sensor for the determination of chemical oxygen demand (COD) using titanium dioxide, based on the use of a pair of oxygen electrodes and flow injection analysis, is described. The measuring principle is based on the direct determination of the oxygen concentration change resulting from photocataltic oxidation of organic compounds. One of the two oxygen electrodes, the reference oxygen electrode, was utilized to measure the reference signal responding only to oxygen present in the injected samples. Oxygen consumption due to the TiO2-catalyzed photochemical oxidation of organic compounds in samples was monitored with the working oxygen electrode. The COD value of this sensor was calculated as the difference of the currents at reference and working oxygen electrodes, respectively. The operation characteristics of the sensor are demonstrated using artificially treated wastewater as a substrate. The sensor was also applied to the determination of COD in real water samples from dam reservoirs (n = 20) all over Japan. The results were in good agreement with those from the conventional COD methods (i.e., permanganate and dichromate methods).     

Determining the minimum iteration period of an algorithm

Digital signal processing algorithms are repetitive in nature. These algorithms are described by iterative data-flow graphs where nodes represent computations and edges represent communications. For all data-flow graphs, there exists a fundamental lower bound on the iteration period referred to as theiteration bound. Determining the iteration bound for signal processing algorithms described by iterative data-flow graphs is an important problem. In this paper we review two existing algorithms for determination of the iteration bound. Then we propose another novel method based on theminimum cycle mean algorithm to determine the iteration bound with a lower polynomial time complexity than the two existing techniques. It is convenient to represent many multi-rate signal processing algorithms by multi-rate data-flow graphs. The iteration bound of a multi-rate data-flow graph (MRDFG) can be determined by considering the single-rate data-flow graph (SRDFG) equivalent of the MRDFG. However, the equivalent single-rate data-flow graph contains many redundant nodes and edges. The iteration bound of the MRDFG can be determined faster if these redundancies in the equivalent SRDFG are first removed. A previous approach has considered elimination of edge redundancy. In this paper we present an approach to eliminatenode redundancy in the MRDFG. We combine elimination of node and edge redundancies to propose a novel algorithm for faster determination of the iteration bound of the MRDFG.This research was supported by the Advanced Research Projects Agency and monitored by Wright—Patterson AFB under contract number F33615-93-C-1309.     

Mechanical fibre optic switching using p.v.d.f. bimorph

An optical fibre switching element has been constructed, based on the electromechanical deformation of a bimorph of piezoclectric polymer, p.v.d.f. (polyvinylidene fluoride). Light transmitted through a fibre was switched between two other fibres situated next to each other by the application of the voltage of 3.5 V r.m.s. at 10 Hz. The insertion loss of this element was 0.7 dB.     

Effect of stress wave shape on the crack propagation velocity in cyclic delayed failure

Crack propagation velocity in delayed failure under superposed repeating load, ($\text{d}\text{a/}\text{d}\text{t)}{}_{\mathrm{R}}$, was compared with that under static load, ($\text{d}\text{a/}\text{d}\text{t)}{}_{\mathrm{S}}$Two peaks appear on the relation between decreasing rate of crack propagation velocity, $\text{1-β = 1 ? (}\text{d}\text{a/}\text{d}\text{t))}{}_{\mathrm{R}}\text{/(}\text{d}\text{a/}\text{d}\text{t)}{}_{\mathrm{S}}$ and frequency, ?, both under sinusoidal and square load. By changing the ratio of holding time at maximum stress intensity factor to that at minimum stress intensity factor in square load, it was deduced that the existence of two peaks on the 1 ? β vs $\text{f}$ curve was caused by an asymmetric interaction between hydrogen atoms and cyclic moving of the position with triaxial tensile stress at crack tip. Moreover, the relation between 1 ? β and $\text{f}$ under the positive or negative saw tooth load could be well explained by the interaction model.     

Consideration on Call Processing Function Distribution to Subscriber Terminal

This paper proposes a new sharing of call processing functions between a terminal and a switching system, taking recent technology advances into consideration. Information and its processing in an electronic switching system are defined and their calculation method is shown to discuss the function share. Numerical examples of information and its processing amount are obtained using NTT's commercial system, D-10, for an example. Possibility of function distribution to a subscriber terminal is discussed, based on information and its processing amount obtained by the analysis. The amounts of information and its processing in an existing switching system are estimated to both be reduced to about 35 percent by distributing to a terminal function, such as subscriber's action detection, audible signal generation, dialed number storage and display and so on. On the other hand, the information and its processing amount shared by the functional terminal are estimated to amount equivalently only to 5 and 10 percent respectively of those of an existing switching system, because introduction of functional terminals eliminates conventionally required time urgent information processing. Therefore, the total information and its processing amount in the telephone system incorporating functional terminals are estimated to be about 40 and 45 percent of those solely shared by an existing switching system, respectively. It is also mentioned that the functional terminal guarantees the variety of services which enables economical use of the telecommunication network.     

Cloning of a fatty acid synthase component FAS1 gene from Saccharomyces kluyveri and its functional complementation of S. cerevisiae fas1 mutant

A gene encoding a fatty acid synthase component, FAS1, has been cloned from a genomic library of the polyunsaturated fatty acid (PUFA)-producing yeast Saccharomyces kluyveri. This gene (named Sk-FAS1) was found to contain an open reading frame of 6150 bp, coding for 2049 amino acids. The deduced Sk-FAS1 protein showed significant (75-59%) homology with FAS proteins from the other yeasts, including S. cerevisiae, Candida albicans and Yarrowia lipolytica. The substrate-binding sites of the acetyl transferase and malonyl/palmitoyl transferase domains, and the FMN- and NADPH-binding sites of the enoyl reductase domain, were all highly conserved. Expression of the Sk-FAS1 gene in S. cerevisiae complemented genetic disruption of the S. cerevisiae FAS1 gene (Sc-FAS1), suggesting the formation of a heterogeneous complex of Sk-FAS1 (beta) and Sc-FAS2 (alpha), which is able to function to synthesize fatty acids. Compared with the isogenic wild-type of S. cerevisiae, as well as S. kluyveri, the S. cerevisiae fas1 mutant carrying the Sk-FAS1 gene showed an increase in the relative amount of 16-carbon fatty acids and a decrease in 18-carbon fatty acids.